Sooner or later, every person is faced with the fact that the headphones stop working and thinks about the question: “How to fix them?” For this process, you need to stock up on time, knowledge, and the necessary tools. Below are common breakdowns and repair tips. But if the device cannot be repaired, sometimes you just need to buy new headphones.
The earpads are worn-out and uncomfortable to use
Worn-out earbuds can go from a simple inconvenience to unbearable, especially with extended use. For some headphone models, the first problem most users encounter is worn-out headphone pads.
How to fix it?
- Prepare the workplace and all the necessary tools (new earpads, a non-sharp knife for removing ear pads, a brush)
- Carefully remove old headphone cushions, brush off dust and dirt
- Install new replacement earpads.
Only one side works
There are several possible causes for this problem, namely:
- Incorrect phone or PC settings
- Damaged headphone wire — this refers to worn wires or manufacturing defects.
How to fix it?
It is important to rule out the possibility that the problem is actually coming from the phone or computer and not from the headphones themselves. Here are some solutions you can try:
- Try using a different pair of headphones with your audio device.
- Restart your audio player.
- Check if the settings are correct.
- Make sure the headphone jack is clean.
If the problem is related to the headphones, we recommend that you contact a specialist who will determine the breakdown and give a solution to the problem.
The headphone jack or plug is bent
A bent headphone jack can cause several problems such as noises in sounds and low volume. This usually occurs when the connector is physically damaged.
How to fix it?
- Using two thin pliers, grasp one by the tip of the plug and the other by the ring or middle part of the headphone plug.
- Gently bend the fork to its original shape
- Check the plug to make sure it is straightened out. If not, keep applying the same force until you achieve the desired result.
- If straightening the headphone plug does not solve the problem, try replacing the plug.
Interference with wireless headphones
When using wireless headphones, interference is one of the most common problems.
Some of the possible causes of this problem:
- Sound settings – this problem usually occurs when drivers are corrupted or you are performing a system update.
- Connection problems. Due to various connection problems, noise may be heard in the headphones. For wireless headphones, too far from the device or physical interference can cause problems.
- Damaged headphone speakers. Damage to the headphone may cause audio problems.
How to fix it?
- First, clean the headphones and the connector – perhaps the problem is that dirt has got into your device and therefore noise is heard.
- Avoid interference such as microwave ovens. Also, make sure there are no obstructions between the headphones and the device.
- If that doesn’t work, change the software settings on your audio player.
- If after the performed manipulations nothing has changed, we advise you to contact a specialist who will determine the problem of the breakdown and its solution.
With this guide, you will now be able to determine the root cause of your headphone failure. And also find the necessary solutions to common breakdown problems. If nevertheless, replacement of the device is inevitable, we recommend our article in which you can learn more about the headphones and their features.
🛠 What are the most common headphone breakdowns?
- Lack of sound in the speaker;
- Noise in headphones;
- Cracked or broken cable;
- The earpads are worn-out and uncomfortable to use.
The solution to all these breakdowns in our article.
❗ Is it dangerous to use broken headphones?
In most cases, this is safe. But there are cases that can lead to electric shock from headphones.
🤔 What do I need to repair broken headphones?
Depending on the underlying problem, you may need the following tools:
- Scissors or sharp blade
- Insulating tape
- Soldering iron.
🎧 I hear interference in my wireless headphones, how can I fix it?
Clean the headphones and the jack first — the problem may be that dirt has gotten inside and therefore noise is heard. We also recommend changing the software settings and avoiding interference from kitchen devices such as the microwave.