How To Get Blood Out Of Carpet: Remove In Two Shakes

There is no need to waste time and money on dry cleaning, you can remove a bloodstain with the help of improvised means. Read on for easy stain removal techniques.
How to get blood out of carpet

There are situations in which blood can get onto your carpet. When blood gets on the carpet, it penetrates deeply, curls up, and quickly dries to the fibers. Such a stain is difficult to remove if you do not react quickly. Many people get upset and decide to take the carpet to the dry cleaner or get rid of the carpet altogether. But the situation can be saved on your own and at a minimal cost. In this article, we will tell you how to properly get blood out of the carpet.

7 proven ways to get blood out of the carpet

How to clean a fresh blood stain from carpet

When the stain is fresh, it is more likely to remove it completely from the carpet. But before you start cleaning, wipe off excess liquid with a dry cloth or tissue using a swiping motion (but don’t press hard, so that the blood doesn’t penetrate deeper into the carpet). Repeat until the bloodstain is dry, then use one of the methods below.

  1. Removing blood with cold water
Removing blood with cold water

To remove a bloodstain with water, use only cold water! If you use warm or hot water, then the blood will coagulate and it will be almost impossible to wipe it off.

  • Apply cold water to the stain and place a rag or dry wipes on top of it. For convenience, you can use a spray bottle.
  • Press lightly on the rag or napkin to absorb the blood into it.
  • Repeat the process over and over until there is no stain on the carpet.
  • Then wait until it dries completely. You can use dry wipes to speed up the process or dry with a hairdryer.
❗️ Warning
This method is not suitable for silk, wool, and viscose carpets!
  1. Removing blood with salt
Removing blood with salt


Salt can deal with any stain, including bloodstains on most types of carpets.

  • Prepare the mixture: mix water and salt in a 1:1 ratio to make a thick mass, like sour cream.
  • Apply this product to the stain for 5-10 minutes.
  • Wipe the stain with a clean dry sponge or towel.
  • Vacuum the carpet.
❗️ Attention
Control the proportions. Excessive water can damage silk or rayon carpet!
  1. Removing blood with soapy water
Removing blood with soapy water

Many people recommend using dishwashing detergent or shampoo solution, but we do not recommend applying these products. The safest option is to use odorless laundry soap or baby soap without additives because these products will not fluff the carpet pile.

  • Whip the soapy solution with a sponge until foamy.
  • Apply a small amount of the solution with a sponge to the stain.
❗️ Attention
Don’t add too much water!
  • Rub the hard side of the sponge lightly over the stain.
  • Blot the stain with a damp cloth.
  • Dry the rug with a hairdryer or wipe with dry wipes.
❗️ Warning
This method is not suitable for silk, viscose, and wool carpets.

How to clean a dried blood stain from carpet

There are several effective ways to remove dried blood from the carpet by yourself. Stains require a lot of water, so, please note that these methods may not be most effective for silk and wool carpets, because water destroys the structure of the piles and dilutes the dye. If the stain cannot be removed, you will have to contact a dry cleaner.

  1. Removing blood with table vinegar
Removing blood with table vinegar

Table vinegar can help remove blood stains from the carpet effectively. To do this, follow the instructions below.

  • Lightly dampen a cotton ball with vinegar.
  • Apply a cotton ball to the stain for 5-7 minutes.
  • Wipe off excess moisture with a dry cloth or rag. Don’t rub as the vinegar can soak into the piles and leave an acrid odor.
  • After cleaning the piles may be crumpled, so vacuum the carpet to return its original looks.
❗️ Warning
Don’t overdo the carpet with vinegar, as this can discolor the pile and lead to white spots. Also, this method is not recommended for silk and colored carpets with a pattern!
  1. Removing blood with hydrogen peroxide
Removing blood with hydrogen peroxide

Hydrogen peroxide is very effective against bloodstains, but it must be used very carefully.

  • Dampen the stain with regular pharmacy peroxide and leave it for 1 hour.
  • After that, blot the stain with a dry cloth, rag, or towel to remove excess moisture.
  • Repeat the procedure until the blood is completely wiped off from the pile of the carpet.
❗️ Warning
We strongly advise against cleaning colored carpets, silk, wool, viscose, and cotton carpets in this way, as white spots may remain on them!
  1. Removing blood with ammonia
Removing blood with ammonia

Ammonia works on the principle of destroying the molecular compounds of the blood and splitting them off from the carpet pile. This remedy is more potent than peroxide, so use it exclusively on dry blood and wear gloves to avoid damaging your skin.

  • Add 2-3 drops of ammonia to half a glass of cold water.
  • Apply this solution to the carpet for 5 minutes. For convenience and safety, you can use a spray bottle.
  • Use a patting motion to absorb moisture from the stain onto a rag or dry wipes.
  • Repeat the procedure until the stain is completely gone.
  • Dry and vacuum the carpet for aesthetics.
❗️ Warning
This method is only suitable for synthetic carpets with light colors (for example, white or milky) because ammonia can discolor fabrics!
  1. Removing blood with cleaning solutions 
Removing blood with cleaning solutions

You can also use a stain remover for both dry and fresh blood. The main thing is that the product contains acids or peroxide.

You can purchase them at any household supply store or a dry cleaner. Be sure to read the instructions for use and compatibility with the fabrics of which the carpet is made. 

Summary

In this article, we’ve covered 7 ways you can remove blood stains (dried and fresh) from your carpet yourself. Follow our instructions carefully and be attentive to the advice. With the help of these simple life hacks, you can restore your carpet to its previous look and enjoy it.

FAQs

🏆 What is the best way to get blood out of the carpet?

The best ways to remove blood stains from the carpet are cold water, salt, soapy water, peroxide, vinegar, ammonia, and stain remover. Read more about these methods in our article.

🍚 Can baking soda remove blood from the carpet?

Yes, for the product you need to mix 3 tablespoons of baking soda and 3 tablespoons of water and leave overnight. But this is a long and not the most effective way, as many say, so we do not recommend using it specifically for carpets.

🧴 What is the best stain remover for blood?

The main thing to pay attention to when choosing a stain remover is the composition. The best is the one that contains either hydrogen peroxide or acid in the composition.

🧐 Can toothpaste remove blood stains?

This method is not suitable for use with carpets and large and old bloodstains, as it requires washing after the procedure. Because carpets are often larger and may not fit into the washing machine, you will still need to dry clean the carpet.

Total
0
Shares
Leave a Reply

Your email address will not be published.

Related Posts
?1Do NOT follow this link or you will be banned from the site!